EasyManua.ls Logo

HERO GLAMOUR XTEC PROGRAMMED FI - Braking System; Braking Operation and Maintenance

HERO GLAMOUR XTEC PROGRAMMED FI
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Front and Integrated brakes (Drum
type)- Check operation. Adjust free play if
necessary (page 58).
Rear brake (Disc variant)- Check for
correct brake fluid level in the reservoir
(page 57).
Rear brake (Drum type)- Check
operation. Adjust free play if necessary
(page 59).
Tyres- Check condition and pressure
(page 65).
Clutch- Check for smooth operation.
Adjust free play if necessary (page 52).
Drive chain- Check condition and
slackness (page 53). Adjust and lubricate if
necessary.
Throttle- Check for smooth opening and
closing in all steering positions (page 53).
Lamps and Horn- Check that headlamp,
position lamp, tail/stop lamp, turn signal
lamps and horn function properly.
Rear view mirror- Ensure that the rear
view mirror gives a good rear view when you
are sitting on the vehicle.
i3s switch- Make sure whether the i3s
switch is in ON” or “OFF” position
(page 27).
i3s system- Make sure that i3s system is
functional properly (page 27).
Fitting & Fasteners- Check & tighten if
necessary.
Steering- Check for smooth action for
easy maneuverability.
Side stand- Check for proper functionality
(page 29).
STARTING THE ENGINE
Always follow the proper starting procedure
described below :
To protect the catalytic converter in your
vehicle's exhaust system, avoid extended
idling and the use of leaded petrol.
Your vehicle's exhaust contains poisonous
carbon monoxide gas. High levels of carbon
monoxide can collect rapidly in enclosed
areas such as garage. Do not run the engine
with the garage door closed.
If electric starter switch is pressed
continuously and engine does not start,
cranking of engine will stop after 5 secs.
After that rider again needs to press the
electric starter switch.
If engine started, cranking of the engine will
stop after r/min reaches more than 800
r/min under normal condition.
This vehicle is equipped with a side stand
engine kill feature (page 30).
CAUTION
!!

Related product manuals