EasyManua.ls Logo

HERO GLAMOUR XTEC PROGRAMMED FI - Page 69

HERO GLAMOUR XTEC PROGRAMMED FI
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
(1) Air pressure gauge
Inspection
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects.
Look for:
Bumps or bulges in the side of the tyre or
the tread. Replace the tyre if you find any
bumps or bulges.
Cuts, splits or cracks in the tyre. Replace the
tyre if you can see fabric or cord.
1
Excessive tread wear.
Carefully inspect the tyres for any damage,
if the vehicle hits a pothole or hard object.
Tread earw
Replace tyres immediately when the tread
wear indicator (1) appears on the tyre. The
tread limits are:
MINIMUM TREAD DEPTH:
Front: 1.0 mm Rear: 1.0 mm
Check the tread wear indicator for tyre wear.
(1) Tread wear indicator (2) Arrow mark
2
1

Related product manuals