21
STARTING THE ENGINE
2. Turn the fuel valve
“ON”.
3. Find neutral position
& check N indicator
glows on instrument
cluster with ignition
“ON”.
4. Make sure whether
the i3s switch is
in “ON” or “OFF”
position.
WARNING
!!
Never run the engine in a closed area, the exhaust contains poisonous gases.
NOTE
•
Do not accelerate when starting the vehicle with the bystarter “ON”.
•
To start the engine in any gear position using the electric starter, press the clutch lever and
push the starter switch.
•
Kick starting will not be possible when the transmission gears are engaged. Shift the
transmission into neutral before kick starting.
•
Never attempt to kick start while vehicle is moving forward or backward. This may lead to
damage to the product and is not safe as well.
1. Turn the ignition
switch “ON”.
6. Open the throttle slightly
& press the starter switch.
(Alternatively kick starter
pedal can be used for
starting).
5. Pull the bystarter lever
outwards to “ON”
position as indicated
(Use bystarter during
cold conditions).
7. Push the bystarter knob
inwards to “OFF”,
position as indicated,
after the engine gets
sufficiently warmed up to
have a stable throttle
response.
To Next Page
Loading...
