HERO IGNITOR TECHNO - JOBS APPLICABLE TO PERIODIC SERVICES; Periodic Service Checklist

JOBS APPLICABLE TO PERIODIC SERVICES
•
Replace engine oil or top up as per the maintenance schedule.
•
Clean engine oil strainer screen at first service then at every 6000 km.
•
Inspect drive chain slider.
•
Inspect brake shoe wear at every service, adjust if necessary.
•
Inspect, clean spark plug at every service, adjust if necessary (replace at every 12000 km).
•
Wash the vehicle, blow dry with air.
•
Inspect fuel line at every service.
•
Inspect throttle free play and operation at every service, adjust if necessary.
•
Clean carburetor at first service then every 6000 km, adjust if necessary.
•
Replace air cleaner element at every 15000 km.
•
Inspect bystarter operation at every service.
•
Inspect the valve clearance at every service, adjust if necessary.
•
Clean engine oil centrifugal filter at first service then at every 6000 km.
•
Inspect oil circulation at every service.
•
Inspect electric starter operation at every service.
•
Inspect, clean, lubricate and adjust the drive chain at every 2000 km.
•
Inspect battery voltage at every service and charge if required.
•
Inspect brake pads, disc wear and brake fluid level at every service. Top-up if necessary (optional).
Replace brake fluid once in every two years or 30000 km. whichever is earlier.
•
Inspect headlamp focus at every service, adjust if necessary.
•
Inspect clutch free play at every service, adjust if necessary.
•
Lubricate the side stand and main stand at every service.
•
Inspect whether i3s system is working properly at every service.
•
Clean and lubricate brake cam at second service, then at every 6000 km.
•
Inspect wheels, wheel bearings and tyre pressure at every service.
•
Inspect rear suspension mounting bushes play, replace if necessary.
•
Inspect secondary air injection system at every 6000 km.
•
Inspect front suspension at every service, replace oil once in every 2 year or 30000 km whichever is earlier.
•
Inspect all lamps, horn and switches at every service, adjust if necessary.
•
Inspect all the fasteners and tighten to the specified torque (if required).
•
Polish entire vehicle.
•
Inspect the canister hoses for deterioration, damage or loose connections and canister for cracks or other damages.
•
Inspect steering for smooth operation, adjust in every alternate service and lubricate at every 12000 km.
HMCL Niloy Bangladesh Ltd.