EasyManua.ls Logo

HERO IGNITOR TECHNO - BASIC TROUBLESHOOTING; Engine Starting Problems

HERO IGNITOR TECHNO
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
BASIC TROUBLESHOOTING
Check Fuse
Inspect Battery
Check connections, Ignition switch/starter switch
OK
OK
OK
Loose
Replace Fuse (ref. page 51)
Refill
Secure connections
Weak
Fused
Consult Authorised Distributor/Dealer
B. Electric Starter Not Working
Consult Authorised Distributor/Dealer
Check Ignition Switch
OK
OK
OK
Turn ignition switch “ON”
“OFF”
C. No Spark At Spark Plug
No Spark
Consult Authorised Distributor/Dealer
Check Spark Plug for Fouling/
Improper Electrode Gap
Replace Spark Plug/Adjust
Spark Plug Gap (0.8-0.9 mm)
Loose Contact
Check for Poorly Connected
or Loose Spark Plug Wire
Secure Properly
Check fuel valve position
“ON” Position
Check fuel in Fuel Tank
OK
OK
Check fuel Lines
Leakage/Air Lock
Turn to “ON” position
Refill
Rectify
No Fuel
“OFF”
A. Fuel System
Consult Authorised Distributor/Dealer
1. STARTING TROUBLE - ENGINE DOES NOT START
Check Bystarter lever position
“OFF” Position
Check Air Cleaner element
OK
Turn to “OFF” position
Dirty
“ON”
Consult Authorised Distributor/Dealer
2. ENGINE STARTS BUT STALLS
Replace

Table of Contents

Related product manuals