EasyManua.ls Logo

Hesai PandarQT - Status Feedback Fields

Hesai PandarQT
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
6.2.3 PTC_COMMAND_GET_INVENTORY_INFO
Command message payload
None
Feedback message payload
Field
Length
Description
sn
18 bytes
Serial number of the device
date_of_manufacture
16 bytes
Date of manufacture in ASCII (yyyy-mm-dd)
mac
6 bytes
MAC address of the device
sw_ver
16 bytes
Software version in ASCII (xx.xx.xx)
hw_ver
16 bytes
Hardware version in ASCII
control_fw_ver
16 bytes
Controller firmware version in ASCII
sensor_fw_ver
16 bytes
Sensor firmware version in ASCII
angle_offset
2 bytes
Zero-angle offset, as an unsigned short value in network byte order (big endian)
model
1 byte
0 Pandar40P 2 Pandar64 3 Pandar128
5 Pandar40 15 PandarQT 17 Pandar40M
motor_type
1 byte
0 - single direction
1 - dual direction
NOTE Not supported on Pandar40
num_of_lines
1 byte
Number of channels
reserved
11 bytes
-
6.2.4 PTC_COMMAND_GET_CONFIG_INFO
Command message payload
None

Other manuals for Hesai PandarQT

Related product manuals