Heta GREEN200 - Antifreeze Temperature; Checking the Statistics; Date and Time; Display Brightness

15
4.4.2 Checking the statistics
The Heta controller, installed on your heating
device, monitors the combustion system ope-
ration and provides different information about
the usage of the heating device, like ”Heating
time”, ”Average temperature”, ”Total consump-
tion” and ”Average power”. The system shows
all this information for different time periods:
Today, Yesterday, Last 7 days, Last 30 days,
Last 90 days, Last 6 months, Last year and
from the beginning.
For seeing the Statistics:
Tap on to enter the Statistics menu and tap
on the desired time period.
If you want to delete the statistics, tap on .
The display will ask you ”Do you really want to
delete statistic log?” confirm with ”YES” or in
case you change your mind, cancel with ”NO”,
or with .
4.4.3. Settings
4.4.4 Date and time
- Tap on to enter the Settings menu.
- Tap on ”Time” to enter the Time menu, set
the time and day and confirm with
OK
.
- Tap on ”Date” to enter the Date menu, set the
time and confirm with
OK
.
Note:
Pay attention in setting up the date and time
properly. Otherwise the weekly timers will not
be performed when needed.
4.4.5 Setting the fuel quality
Heta Premium Display allows you to select up
to 3 different qualities for pellets.
- Tap on to enter the Settings menu.
- Tap on ”Fuel”.
- Set the ”Pellets Quality” from 1 to 3
Note:
The meaning of qualities 1, 2 and 3 are
provided by Heta A/S
4.4.7 Display options
Inside the Display options menu, Heta Premium
Display allows you to:
- Set the display brightness
- Select the screens to be displayed in idle
mode
- Activate the display cleaning function
For entering the Display options menu, tap on
and then ”Display options”.
4.4.8 Display brightness
The Heta Premium Display offers different pos-
sibilities of adapting the display brightness.
The brightness can be adapted manually or
automatically, thanks to an integrated ambient
light sensor.
Inside the ”Display brightness” menu you are
able to:
- Activate/deactivate automatic adaptation to
the ambient brightness:
Enter the Display brightness menu and tap on
for enabling or for disabling the
automatic adaptation to the ambient bright-
ness.
4.4.6 Antifreeze temperature
The Heta Premium Display allows you to set
the minimum ambient temperature to be main-
tained. For example, if you are not at home
for a few days and the weather gets extremely
cold, there is a risk, that the temperature inside
the house may fall under the freezing point and
damage the water pipes inside the walls of your
house.
To setup the antifreeze temperature, follow the
steps below:
- Tap on to enter the Settings menu.
- Tap on ”Antifreeze” set the desired antifreeze
temperature, or disable the antifreeze operation
and confirm the setting with
OK
.
- Settings from 3 – 20°C - Antifreeze mode
enabled (the temperature setpoint will be main-
tained)
- Setting to OFF -.Antifreeze mode disabled.