HETRONIC BMS-1 - Installation and Safety Test Data; Installation Responsibility and Test Data Form

17
This for must be completed and signed by the person
responsible for installation of this radio remote control
system.
Hetronic assumes no responsibility for the correct
installation of the radio remote control system. The
equipment operator must ensure that the radio remote
control system and the crane/machine operate
correctly together. The operator must also ensure that
all safety devices and features are in place and
operating correctly. The operator is responsible for
understanding and following all safety precautions in
this and other applicable operator manuals.
INSTALLATION AND SAFETY TEST DATA
Crane Data
Manufacturer
Model Number
Serial Number
Year of Production
Radio Remote Control Data
Manufacturer Hetronic
Model BMS
System Type GA 610
System Number
I/We installed the radio remote control system, performed the safety test and inspected the crane/machine. The
appropriate instructions and rules of this machine type are followed.
Place
Date
Company
Name of Installation Technician
Signature