USER MANUAL | NOVA OCUs
45
Appendix D – OCU Care
D.1 Caring for your OCU Display
In the harsh industrial environment where your OCU operates, it's crucial to take special care of the display, a legacy option on
your OCU, to ensure continued performance and visibility. Regularly clean the display cover using a soft, lint-free cloth lightly
dampened with water or a mild, non-abrasive cleaning solution. Avoid using harsh chemicals or abrasive materials that could
damage the display protection cover permanently. Exercise caution when cleaning around the display to prevent accidental
scratching or other damage. Additionally, consider using display protective films to minimize exposure to abrasive dust, concrete,
metal filings, welding sparks, and other corrosive elements present in your work environment. These are available for purchase
from your nearest Hetronic dealer or the Hetronic web shop. By following these care instructions, you can prolong the lifespan
and maintain the functionality of the display on your OCU, crucial for controlling your valuable industrial equipment.
D.2 Display Protection Film Replacement
The following instructions apply for Protection Film replacement for OCU models NOVA C, Nova L, XL and XXL and variants
thereof equipped with a graphic display. The steps must followed cautiously so as not to incur any scratches/damage to the
display cover or the OCU itself. The process requires a) a new protection film corresponding to the display size on your OCU, b)
a flat smooth-edged tool, and c) a lint-free cloth. Proceed as follows:
If your OCU is already equipped with a display protection film, remove
2.
Check that the display is free from scratches
and dents before the new protective film is to
be applied.
3.
Use the lint-free cloth to clean the
surface of the display from any dust,
grease or particles.
4.
Peel the protective blue tab backing and
position the screen protector to centre it on the
display.
5.
Use the smoothing tool to remove any
bubbles trapped under the film by
pushing them towards the nearest
edge. Care must be taken so as not to
scratch the upper protecting film.
6.
Remove the protective red tab cover
To Next Page
Loading...
