USER MANUAL | NOVA OCUs
6
2.
Introduction and Functional Description
We congratulate you on your purchase of the new Hetronic NOVA product. You have chosen a high-quality brand. Hetronic
recommends you to familiarize yourself with the control unit before using it for the first time. Please carefully read the operating
instructions and safety advice provided in this manual. Only use the product as instructed and for its intended field of application.
Keep these instructions in a safe place. If you pass the product on to someone else, please ensure that you also provide all
corresponding documentation, including a copy of this manual.
Note: This manual does not cover the EX versions of NOVA OCUs for hazardous environments, despite the similarity of the
products with those described in this manual.
2.1 Before Operating Your Wireless Control Unit
Please ensure that all radio remote control system components have been installed correctly before proceeding. Prior to startup,
it's crucial to verify that both the machinery and radio remote control ‘STOP’ functions are in perfect working order.
Familiarize yourself thoroughly with all safety precautions outlined in the manual and review the control functions and operation
of both the machinery and radio remote control system. When not in use, remember to power off the OCU and store it in a secure
location to prevent unauthorized access.
Keep the USB Dongle, which serves as a security key for programming the OCU, in a separate, secure place. If the controller
equipment doesn't respond as expected, cease operation immediately. Turn off the OCU and report the issue to your supervisor.
Always power off the OCU before conducting any maintenance work. Ensure you have fresh batteries on hand or consider an
optional rechargeable battery pack to guarantee a fully charged battery is always available.
Remember, installation, setup, and servicing should only be carried out by authorized and qualified personnel. At Hetronic, safety
and reliability are our top priorities, and we're committed to providing you with the best support every step of the way.
2.2 Product Rating Plate
The product rating plate holds valuable information about your control unit. It’s your key to unlocking Hetronic’s full service
support potential.
1. Compliance Type Approvals such as CE, FCC, IC, etc.
2.
`
Type of NOVA OCU
3. Eleven-digit Production Number
4. Eleven-digit System Number
5. Ingress Protection Rating
6. Frequency information
7. Supply voltage
8. Current rating
9. Country of Manufacture
10. Manufacturer address
Figure 1. Product Rating Plate
2.3 Product Serial Numbers
Our commitment to quality service begins with your convenience! Before reaching out to your Hetronic dealer for service, repairs,
or replacement parts, make sure to have the equipment Production and System numbers handy. You can find these numbers
conveniently located on the product rating plate, a silver label affixed to your control unit. They’re not just a code; it's a legacy of
quality craftsmanship from Hetronic. Ensure that this valuable information remains legible throughout the lifetime of your product.
2.3.1
Production Number
The production number, marked by the symbol 'P:', consists of 11 digits. It's not just a number; it's a window into your unit's story.
The first digit reveals its manufacturing location, followed by the week and year of production represented by the next four digits.
Finally, the trailing six digits offer a unique serial number for your unit.
2.3.2
System Number
The system number, marked by the symbol 'S:', consists of 11 digits. The first digit reveals the manufacturing location at which
the unit was uniquely paired with the machine control unit defining it as a complete radio remote control system, followed by the
week and year of it was uniquely paired represented by the next four digits. Finally, the trailing six digits offer a unique serial
number for your complete radio remote control system.
10
9
To Next Page
Loading...
