USER MANUAL | NOVA XL
3
NOVA XL Technical Specifications
HOUSING
Impact Resistant Polymer Composite
FREQUENCY RANGE
4xxMHz, 8xxMHz, 9xxMHz, 1.2GHz and
2.4GHz
DIMENSIONS
H: 165mm x W: 315mm x D: 170mm
H: 6.5” x W: 12.4” x D: 6.7”
ANTENNA
Internal (external on request)
WEIGHT
~1.9Kg (4.2 lbs.); depends on
configuration
OUTPUT ERP (50 OHM)
Typically 10mW, or more subject to country
legislation
ENVIRONMENTAL
PROTECTION
Min IP 65 (Exceeds Nema 4)
OPERATING TIME
>10hrs for NiMH batteries
> 20hrs for Li-Ion batteries
Continuous operation on single charge
depending on OCU configuration
OPERATING TEMPERATURE
STORAGE TEMPERATURE
-20C to +70C
(-4F to +158F)
-40C to +85C
(-40F to +185F)
SAFETY
Enhanced Rolling Code for 400MHz links
AES encryption for FHSS links
Active and Passive STOP function up to CAT
3 PLd
Optional PLd on other controls
BATTERY RATING/TYPE
1x 3.6V NiMH or 1x 3.7V Li-Ion 9Ah
rechargeable UN38.3 IEC62133 certified
battery packs depending on OCU type
RESPONSE TIME
Less than 100ms
BATTERY CHARGER
Hetronic UCH-2 for NiMH
or UCH-3 for Li-Ion battery
OPERATING RANGE
Typical line of sight – Varies depending on
RF power and working environment
> 250m for 400MHz band at 10mW ERP
> 250m for 800MHz(FH) band at 25mW ERP
> 200m for 2.4GHz (FH) band at 30mW ERP
DIAGNOSTICS
Status LED for operation and
standard/advanced low battery detection,
internal buzzer
OPTIONS
External antenna
Monochrome 120x32 backlit LCD
Branding decals
Color coded bottom enclosure
Programmable tilt and palm sensors
TTL or CAN Cable Control
Cabled Battery Back-Up
Foot path LED light
Haptic vibration feedback
HUMIDITY RANGE
0 to 97% max. non-condensing
TYPICAL CONTROL
CONFIGURATION
OPTIONS
Any combination of toggle switches, push
buttons, maximum of two multiple axis cross
joysticks or six paddle levers, mushroom type
“PUSH” STOP Switch. Custom designs on
request.
To Next Page
Loading...
