11
Messaging Lights
The Messaging Lights LED indicator kit (optional) can be used to monitor machine state at a distance from
the measuring station.
Thermal Compensation System
The thermal compensation system is of the multisensor type.
The temperature sensors are positioned inside the measuring machine on the axes, table and beam. In
addition, the user is provided with an external sensor that is to be applied to the workpiece to be measured
when the thermal compensation system is active.
Due to its intrinsic characteristics and the number of sensors applied to the machine, the thermal
compensation system ensures maximum measuring performance in a broad temperature range.
When the thermal compensation system is active, the control system corrects the measurements made by
the measuring machine on the basis of the temperature values measured by the sensors.
PULSE
The PULSE system (optional) is used to monitor and record ambient conditions by detecting events
occurring during machine use (crashes, vibrations, exceeding of temperature and humidity limits, and air
supply pressure, etc.).
It consists of vibration, temperature, humidity, air supply pressure and crash sensors connected to the PC
via a USB port and a dedicated module network.
The data collected by the sensors in the kit are made available for later event analysis and immediately
indicate the occurrence of operating irregularities to the operator.
To Next Page
Loading...
