Hexagon GLOBAL S - Conventions; Safety Information - the Customers Responsibilities

Contents
•
vii
Conventions
The following conventions are used in this manual to distinguish between various kinds of information.
Danger
Indicates a hazardous situation that, if not avoided, will result in death or
serious injury.
Warning
Indicates a hazardous situation that, if not avoided, could result in death or
serious injury.
Caution
Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
Notice
Is used to address practices not related to physical injury.
i
Note: Tip to make your work easier or reference to further information.
Safety Information – the Customer’s Responsibilities
All the operations described in this document that are the Customer’s responsibility must be performed in
respect of national, local and company safety regulations.
The customer must fit the measuring machine with an appropriate protective system capable of meeting the
specific application and safety requirements and, in particular, those that emerge from the risk analysis for
the specific installation: consult the Site Preparation Manual. In particular, the Customer must:
 Adequately instruct the staff responsible for operating the machine on the contents of this manual,
so that they learn how to use the machine safely in consideration of the risks declared in the Site
Preparation Manual and the User Manual.
 Take measures to prevent inadequately instructed staff from inadvertently gaining access to the
machine while it is powered and potentially a source of risks declared in the Site Preparation
Manual and the User Manual.
 Allow access to the machine to personnel to be trained only under the supervision of expert
personnel.
 Guarantee use of the machine for the expected use only.
 Make sure that scheduled maintenance operations are respected and performed.