Maintenance • 75
Figure 36 Fixed Guards – 15.yy.10 Models
Removing Fixed Guards
To remove the fixed guards of the machine, simply remove the screws that secure these components to the
machine structure.
According to version and model, the GLOBAL S measuring machine may be provided with side skirts.
Having completed the maintenance work, reassemble the guards using all the screws and washers removed
during disassembly.
Pay attention to the respective connection wiring if the laser scanners (if present) need to be removed.
Removing Bellows
Polyethylene bellows with Velcro closures protect the Y axis, and the X axis (optional).
To remove bellows:
1. Detach the ends of the bellows from the attachment flanges. The closures are made of Velcro so all
you have to do is pull.
2. Slide off the bellows.
Having completed the maintenance work, carry out the inverse procedure to reassemble the bellows.
To Next Page
Loading...
