User manual for poly-phase meter
10
return to auto-scrolling display mode automatically in a certain time without operating
(default time is 120s). The display item list under manual mode display I display list
is configurable, and 60 items can be configured at minimum, detailed display
information please check the display list.
⚫ Power off display
The LCD will be off as default status. The meter will show power off display by
pressing the button, the item list of power off is the same as that under auto mode, No
push button is pressed for 30~60s, the meter will turn off the LCD.
⚫ Test mode
Meter can enter or exit test mode by receiving command. The meter can display
energy in 3-4 decimals in test mode. When power off happens, the meter will exit test
mode automatically.
To Next Page
Loading...
