HEXING HXE310 - 13 Event Record; Event Classification; Event List

User manual for poly-phase meter
26
13 Event record
13.1 Event classification
➢ Standard event
➢ Tamper event
➢ Relay control event
➢ Power quality event
➢ Communication event
13.2 Event list
Standard Event
Switch to summer
Clock adjusted(old date/time)
Clock adjusted(new date/time)
RTC error
Low Battery Voltage
Error register cleared
Alarm register cleared
Program flash failure
Watchdog error/Exception Reset
Measuring unit fault
Firmware ready for activation
Firmware activated
Firmware failure
Parameter Program
Manual demand reset
TOU activated
TOU modified
Password Program
Reset all
Load Profile Reset
Checksum of energy data error
EEPROM hardware error start
Crystal oscillator error
EEPROM hardware error end