A8 GNSS RTK System Operation Manual
Base or rover mode with external data link.
1. Set base/rover:
Double click F1 with the vo ice prompt “base”, “rover” and
“ static” to choose the wor king mode you need, press power button to
confirm the setting .
2. Set External data link:
Double click F2, then choose External radio from GPRS and
external radio then click the power button to confirm.
3. Setting the radio channel of external data link in base.
Do this through adjusting th e external radio to the right channel.
4. Setting the radio channel of rover:
Hold F2 button with voice pr ompt to choose the channel in need
and press power button to confirm.
51
Static Collecting
To Next Page
Loading...