Hi-Target iRTK5 - Dynamic RTK Measurement

iRTK5 Smart GNSS System User Manual
27
Figure 2-4-23 Reset
6. Others
Static RINEX switch and device volume adjustment.
Figure 2-4-24 Others
2.5 Static mode
2.5.1 Static settings
There are three ways to set up the device to work in the static mode:
1. LCD - Static settings - to set up static mode;
2. Hi-Survey software - Static interface - to set up static or temporary static mode;
3. WEB Interface - Work Mode - to set up static or temporary static mode.