5.1 Introduction
5.1.1 Foreword
The iHand30 controller is a professional data collector, based on the Android system. Using a
combination of physical buttons and touch screen to operate, the default input languages are Chinese
and English, and it supports multiple languages. The industrial-standard design can withstand 1.2
meters drop to a cement floor, is IP67 waterproof and dustproof standard to adapt to a complex
operating environment. At the same time, the super capacity lithium battery can handle all weather
requirements.
The iHand30 controller configures 3.7 inches 640 * 480 highlighted LCD; 1.5GHZ, quad-core 64-bit
CPU; and 16GB ROM +2 GB RAM memory. It has a built-in Micro SD card slot, and maximum support
128GB expansion card (it only supports FAT32 format SD card, the NTFS format SD card cannot be
supported); dual card dual stand-by, and supports the entire 4G network. With the Android 6.0
operating system, the interface is optimized and easy to use.
5.1.2 Features
1. Industrial-standard design, with IP67 it can withstand a 1.2 meters drop to a cement floor and adapt
to a complex operating environment.
2. Highlighted LCD, the LCD screen is normally readable under strong sunlight.
3. Supports Bluetooth, Wi-Fi and 4G，which is convenient to carry out a variety of wireless data
transmissions with the receiver. Wi-Fi and 4G can be used at the same time. Refer to the Hi-Survey
Road Software User's Guide for more details.
4. Internal 8 million pixel camera: for field collection of image information.
5. Internal removable large capacity lithium battery for more than 15 hours of work.
6. Internal NFC chip, supports NFC data transmission for a rapid connection between the RTK and
hand-held controller.
7. Fast charge technology: for a rapid battery charge.
8. Full keyboard input method.
9. Local online upgrade to facilitate quick changes.
5.1.3 Caution
Although the iHand30 hand-held controller is made with chemical and impact resistant materials, it
needs to be carefully used and maintained, and should be kept in a dry environment. In order to
improve the stability and usage cycle of the iHand30 hand-held controller, please avoid exposing it to
extreme environments, such as humidity, high temperatures, low temperatures, corrosive liquids or
gases, etc.
To Next Page
Loading...
