INSTALLATION GUIDE
An ASSA ABLOY Group brand
EDGE EVO 82000-921, Rev. D.3
Page 7
6 Configure
The web browser will prompt for login information.
Note: To correct errors in the controller Network Configuration or if the admin password is not
available, see Appendix B: Troubleshooting.
1. From the Login screen enter admin, leaving the Password field empty.
2. Follow the instructions on the web browser screen to configure EDGE EVO.
Note: On subsequent sessions, the password may be changed by the user. The password must
be between 6 to 10 characters long and can include all printable ASCII characters from 32 to 126
(decimal). Reference: http://www.asciitable.com.
For EDGE EVO Solo, see the EDGE EVO Solo User Guide, 83000-902, rev B.x.
7 Power & Testing
Test the system once per year using the web Graphical User Interface to ensure all wiring and
configuration is correct.
For additional installation information, such as Passive Infrared Device (PIR) and other active REX
devices, as well as connecting fire relays, see http://www.hidglobal.com > Support and search for
"EDGE EVO."
To Next Page
Loading...
