HID FARGO HDP 6600 - 2.8 Installing blank cards into the input card hopper

2.8 Installing blank cards into the input card hopper
Load the cards with the print side down and (if applicable) the magnetic stripe up and towards the front of the printer.
Notes:
l
FARGO UltraCard™ Premium card types are recommended (see 2.8.1 General card information).
l
Cards eject into the output hopper or reject hopper.
l
Each input hopper holds 100 cards.
1. Press the button to open the card input cartridge.
2. Load blank cards then close the card input cartridge.
If using cards with a magnetic stripe, load the cards with the stripe facing up and towards the front of the printer.
3. Close the input card hopper door.
4. Attach the card output hopper to the printer.
PLT-02931, A.4 25 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide