3.3 Advanced menu tab
This tab allows you to select page setup options, printing options, diagnostic settings, and calibration settings.
Page Setup
Menu option Description
Card Input Hopper This option is grayed out if a dual hopper configuration is not selected.
Select which bay the card comes from. Available options are: First Available, Top, or Bottom.
Orientation Sets the card orientation. Select Portrait to print the card vertically. Select Landscape to print horizontally.
Duplexing This option is grayed out if a dual-sided module is not detected.
Single Sided:Select this option to print only on one side of the card. This includes printing on the backside of
preprinted cards that must have their magnetic stripe or smart card chip encoded.
Dual Sided:This option is used for cards printed on both sides.
Card Selects the type of card to print and optionally set up the card size and offset the print layout. Options are:
Type: Select the type of card to print:
l
FARGO UltraCard Premium
l
FARGO UltraCard (default)
l
FARGO UltraCard PC
l
HID Tech Card Composite
l
HID Tech Card PVC
PLT-02931, A.4 40 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide
To Next Page
Loading...
