Multi-spectrum Binocular User Manual
13
Figure 2-11 Check Firmware Status
3. (Optional) If the firmware is not the latest version, upgrade the device. See
Upgrade
Device.
2.9.2 Upgrade Device
Upgrade Device via HIKMICRO Sight
Before You Start
Install HIKMICRO Sight on your phone and connect your device to the app.
Steps
1. Tap the upgrade prompt to enter the firmware upgrade interface.
2. Tap Upgrade to start upgrade.
Note
The upgrading operation may vary due to app updates. Please take the actual app
version for reference.
Upgrade Device via PC
Before You Start
Please get the upgrade package first.
Steps
1. Connect the device to your PC with cable.
2. Open the detected disk, copy the upgrade file and paste it to the root directory of the
device.
3. Disconnect the device from your PC.
4. Reboot the device.
Result
The device upgrades automatically. The upgrading process will be displayed in the
interface.
To Next Page
Loading...
Need help?
General
