Hikmicro HQ35LN User Manual

Multi-spectrum Binocular User Manual
26
Chapter 5 General Settings
5.1 Set OSD
This function can display or hide the OSD information on the live view interface.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select , and press to enter OSD setting interface.
4. Press or to select the Time, Date, or OSD, and press to turn on or turn
off the selected OSD information.
5. Hold to save and exit.
Note
If you turn off OSD, all OSD information on the live view will not be displayed.
5.2 Set Brand Logo
You can add brand logo to the live view interface, snapshots, and videos.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select .
4. Press to enable Brand Logo.
5. Hold to save the settings and exit.
Result
The brand logo is displayed at the bottom left of the image.
5.3 Burning Prevention
Avoid direct sunlight and enable the burning prevention function to reduce the risk of
sensor damage from the heat.

Hikmicro HQ35LN Specifications

General

Brand	Hikmicro
Model	HQ35LN
Category	Binoculars
Language	English