Multi-spectrum Binocular User Manual
20
and 8×.
Note
●
When switching the digital zoom ratio, the top-left corner of interface displays the actual
magnification (Actual Magnification = Lens Optical Magnification × Digital Zoom Ratio).
For example, the lens optical magnification is 2.8× and the digital zoom ratio is 2×, and
the actual magnification is 5.6×.
●
The zoom ratio may vary according to different models. Please take the actual product
for reference.
3.10 Set Picture in Picture Mode
Steps
Hold in live view mode to enable PIP, and hold again to exit PIP. The image
center is displayed in upper middle of the interface.
Figure 3-4 Set Picture in Picture Mode
Note
●
If the PIP function is enabled, only the PIP view zooms when adjusting the digital zoom
ratio.
●
If the PIP function is enabled in thermal mode, the PIP view only switches between
current palette and optical mode; if the PIP function is enabled in optical mode, the PIP
view switches among the selected palettes and optical mode.