Multi-spectrum Binocular User Manual
34
Note
It is recommended to check the local magnetic declination information on the
authorized website before manually correcting the magnetic declination. The eastern
magnetic declination is indicated with a positive mark (+), and the western declination is
indicated with a negative mark (-).
5.8 Geographic Location Display
Note
●
The satellite module is not able to receive signals when the device is indoor. Place the
device in an empty outdoor space to receive signals.
●
In an outdoor space, wait for a moment for the device to display its location.
Equipped with satellite positioning modules, the device is able to display the longitude and
latitude, as well as the sea level altitude of the device on the live image, captured images,
and recorded videos.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select , and press to enable GPS. You can see the
location displayed at the lower right corner of the screen.
Figure 5-9 Device Location Display
Note
If the location information displays the error code “100”, it indicates the signal is weak or
no signal. Please move to the empty outdoor space to try again.
Figure 5-10 Location Display Error Code.
To Next Page
Loading...
Need help?
General
