AX PRO User Manual
19
● The Tag will be displayed on the Tag page.
5. Optional: Tap a Tag to enter the Setting Page.
6. Tap Edit Icon to edit the Tag name.
Note
● If you log in as an installer, skip this step. Editing Tag name is only available to administrator.
● The name should contain 1 to 32 characters.
7. Slide Enable Tag..
8. Select a linked user.
9. Select the Tag type
Note
Different linked users have different Tag permissions.
Operation Tag
You can swipe the Tag to arm or disarm.
Patrol Tag
When you swipe the Tag, the system will upload a record.
10. Optional: Tap Delete to delete the Tag.
System Settings
System Configuration
You can set the device time zone and set the DST time.
In the site, tap the AX PRO and then log in to the device (if required).
Tap → System → Configuration to enter the configuration page.
You can tap to select a time zone.
You can enable the DST and set the DST bias, DST start time, and DST end time.
System Options
Set the system options.
Option Management
In the site, tap the AX PRO and then log in to the device (if required). Tap → System →
To Next Page
Loading...
Need help?
General
