AX PRO User Manual
69
Steps
1. Click System → System Security → Locking User Settings to enter the Locking User Settings
page.
2. Set the following parameters.
Max. Failure Attempts
If the user continuously input the incorrect password for more than the configured times, the
account will be locked.
Note
The administrator has two more attempts than the configured value.
Locked Duration
Set the locking duration when the account is locked.
Note
The available locking duration is 5s to 1800s.
3. Click to unlock the account or click Unlock All to unlock all locked users in the list.
4. Click Save.
Module Lock Settings
Set the module locking parameters, including the Max Failure Attempts, and locked duration. The
module will be locked for the programmed time duration, once the module authentication has
To Next Page
Loading...
