AX PRO User Manual
70
failed for the amount of configured times.
Steps
1. Click System → System Security → Module Lock Settings to enter the Module Lock Settings
page.
2. Select a module from the list, and click the icon.
3. Set the following parameters of the selected module.
Max. Failure Attempts
If a user continuously tries to authentication a password for more than the configured
attempts permitted, the keypad will be locked for the programmed duration.
Locked Duration
Set the locking duration when the keypad is locked. After the configured duration, the keypad
will be unlocked.
4. Click OK.
5. Optional: Click the Lock icon to unlock the locked module.
System Maintenance
You can reboot the device, restore default settings, import/export configuration file, or upgrade
the device remotely.
Select the device and click in the client software, or enter the device IP address in the address
bar of the web browser. Click Project Management →Maintenance to enter the Upgrade and
Maintenance page.
To Next Page
Loading...
Need help?
General
