Video Intercom Door Station·Quick Start Guide
25
4 Before You Start
For the first time use of the device, you are required to activate the device and set the
device password. You can activate the device via internet with Batch Configuration Tool,
or with iVMS-4200 client software.
To activate the device with Batch Configuration Tool or iVMS-4200, refer
to 6.1 Activating Device Remotely.
To activate the device locally, refer to 5.1 Activating Device.
To configure the key parameters of device on the user interface of door
station, you are required to input the admin password. Here the admin password refers
to the configuration password.
The default admin password is 888999.
You can set the login password of the device by yourself.
You must change the default credential to protect against unauthorized access to the
product. Please refer to 5.3 Changing Password.
To Next Page
Loading...
Need help?
General
