Video Intercom Door Station·Quick Start Guide
28
Figure 5-4 Network Configuration Interface
2) Press the # key to enter the network parameters settings interface.
Figure 5-5 Network Parameters Settings Interface
3. Edit network parameters.
1) Move the cursor to parameters to be configured.
2) Press the # key to enter or exit the editing mode.
4. Press the * key to exit the network configuration interface after accomplishing
network parameters settings.
5.3 Changing Password
Purpose:
The default admin password is 888999. You should change the password for the security
sake.
Steps:
1. Go to the configuration mode.
1) Hold down the * key and the # key for 2s to enter the admin password interface.
2) Enter the admin password, and press the # key.
To Next Page
Loading...
