HIKVISION DS-1004KI User Manual

User Manual of the DS-1004K keyboard
16
3.2 Controlling Dome Cameras by Keyboard
Setting the Keyboard Parameters to Control Dome Camera
Before you start:
Check the connection between the keyboard and dome camera. The TA and TB interfaces of CON of keyboard should be connected to
the RA and RB interfaces of the dome camera respectively. The following figure shows the simplest way of connection between a
dome camera and keyboard.
Figure 3-5 Dome and Keyboard Connection
Steps:
1.
Turn the key to the MENU item, and press the Mode button to select PTZ.
Figure 3-6 Turning the Key to MENU
Figure 3-7 Choose Mode as PTZ
2.
Enter the device number. E.g. the device number is 1, press the numeric button 1 and press SITE button again.
Note: The keyboard identifies the dome camera by SITE value, and the SITE value must be exactly the same with the
dome camera No..
3. Use the joystick to set the RS485 parameters.

HIKVISION DS-1004KI Specifications

General

Numeric keypad	Yes
Keyboard layout	-
Pointing device	Trackball
Device interface	RS-485
Connectivity technology	Wired
Wrist rest	No
Product color	Black
Keyboard style	Straight
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Product type	Control panel
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	163 mm
Width	434 mm
Height	43 mm
Keyboard weight	1250 g
Keyboard dimensions (WxDxH)	434 x 163 x 43 mm