User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 5-2 Time Settings
Select the Time Zone.(Optional)
Select the Time Zone when you change your location of the camera.
Figure 5-3 Time Zone Settings
Configure the time synchronization by NTP Server or manually.
Configuring Time Synchronization by NTP Server.
(1) Check the checkbox to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
Figure 5-4 Time Sync by NTP Server
Note: If the camera is connected to a public network, you should use a NTP server
To Next Page
Loading...
Need help?
General
Weight and Dimensions
