User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Note: The SNMP version you select should be the same as that of the SNMP
software.
Steps:
1. Enter the SNMP Settings interface:
Configuration > Advanced Configuration > Network > SNMP
Figure 5-14 SNMP Settings
2. Check the corresponding version checkbox ( ,
, ) to enable the feature.
3. Configure the SNMP settings.
Note: The settings of the SNMP software should be the same as the settings you
configure here.
4. Click to save and finish the settings.
Note: it will ask for a reboot for the settings to take effect.
To Next Page
Loading...
