User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 5-21 Display Settings
Descriptions of parameter configuration:
Exposure Time:
Speeds from 1/25 to 1/100,000 are selectable.
Iris Mode:
Auto and Manual are selectable.
Video Standard:
50 Hz and 60 Hz are selectable. You can choose the different standards according to
the lightening power frequency of the country.
Day/Night Switch:
Day, Night and Auto are selectable.
Sensitivity
The Sensitivity of Day/Night switch can be set Low, Normal or High.
Switch Time:
Day/Night switch time is to adjust the time of day/night switch.
BLC Area:
BLC area is the area sense the light intensity, Close, Up, Down, Left, Right and Center
are selectable.
White Balance:
Auto white balance 1. /AWB1, Auto white balance 2. /AWB2 and Auto are selectable.
Digital Noise Reduction:
Close, Normal Mode and Expert Mode are selectable.
To Next Page
Loading...
