User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Note: The time of each segment can’t be overlapped. Up to 4 segments can
be configured.
(2) Select a Record Type. The record type can be Normal, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, PIR Alarm, Wireless Alarm, Manual
Alarm or PIR | Wireless | Manual.
Normal
If you select Normal, the video will be recorded automatically according to
the time of the schedule.
Record Triggered by Motion Detection
If you select Motion Detection, the video will be recorded when the
motion is detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,
please refer to the Step 1 Set the Motion Detection Area in the Section
5.6.1.
Record Triggered by Alarm
If you select Alarm, the video will be recorded when the alarm is triggered
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm Type
and check the checkbox of Trigger Channel in the Linkage Method of
Alarm Input Settings interface. For detailed information, please refer to
Section 5.6.4.
Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion
and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 5.6.1 and Section 5.6.4 for detailed information.
Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 5.6.1 and Section 5.6.4 for detailed information.
Record Triggered by PIR Alarm
If you select PIR Alarm, the video will be recorded when the PIR alarm is
detected.
Besides configuring the recording schedule, you have to set the PIR alarm
and check the checkbox of Trigger Channel in the Normal Linkage of PIR
Alarm in Other Alarm Settings interface. For detailed information, please
refer to Step 2 Configure the PIR Alarm in the Section 5.6.9.
Record Triggered by Wireless Alarm
If you select Wireless Alarm, the video will be recorded when the wireless
To Next Page
Loading...
Need help?
General
Weight and Dimensions
