HIKVISION DS-2CD4A26FWD-IZS/P User Manual

Network Camera User Manual
45
(3) Click the OK to finish modifying.
 Delete an IP Address or IP Addresses.
Select the IP address(es) and click Delete.
5. Click Save to save the settings.
6.4.3 MAC Address Filter
Purpose:
This function makes it possible for access control. You can enable the MAC address filter to
allow or forbid the visits from the certain MAC address.
Steps:
1. Enter the MAC Address Filter interface: Configuration > System > Security >
MAC Address Filter.
Figure 6-18 MAC Address Filter Interface
2. Check the checkbox of Enable MAC Address Filter.
3. Select the type of MAC Address Filter in the drop-down list, Forbidden and
Allowed are selectable.
4. Set the MAC Address Filter list.
 Add a MAC Address
Steps:
(1) Click the Add to add a MAC address.
(2) Input the MAC Adreess.

HIKVISION DS-2CD4A26FWD-IZS/P Specifications

General

Brand	HIKVISION
Model	DS-2CD4A26FWD-IZS/P
Category	Security Camera
Language	English