User Manual of Network Fisheye Camera
59
Task 3: Set the Alarm Actions Taken for Motion Detection in Section 5.6.1.
Figure 5-38 Exception Settings
3. Click Save to save the settings.
5.6.6 Configuring Line Crossing Detection
Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a
pre-defined virtual line, and some certain actions can be taken when the alarm is
triggered.
Note: Line crossing detection function varies according to different camera models.
Steps:
1. Enter the Line Crossing Detection settings interface:
Configuration> Advanced Configuration> Basic Event > Line Crossing
Detection
Figure 5-39 Line Crossing Detection
To Next Page
Loading...
