HIKVISION DS-2CD6362F-I - Configuring Image Parameters; Configuring Display Settings

User Manual of Network Fisheye Camera
47
5.5 Configuring Image Parameters
5.5.1 Configuring Display Settings
Purpose:
You can set the image quality of the camera, including brightness, contrast, saturation,
hue, sharpness, etc.
Note:
The display parameters vary according to the different camera model. Please refer to
the actual interface for details.
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the camera.
Note:
In order to guarantee the image quality in the different illumination, it provides two
sets of parameters for user to configure.
Day/night Auto-switch
Figure 5-25 Display Settings of Day/night Auto-switch
 Image Adjustment