HIKVISION DS-3E15 P Series - Link Aggregation Configuration; Load Balancing Configuration; Aggregation Group Setup

Chapter 7 Link Ag gregaon Conguraon
Link aggregaon is used to aggregate physical ports to create a logical channel. The advantages of
link
aggregaon are higher transmission rate with wider bandwidth.
Steps
1. Select
→ Link Aggregaon → Load Balancing Conguraon .
Figure 7-1 Load Balancing Conguraon
Source and Desnaon MAC: Load balancing is performed based on source and desnaon
MAC addresses on all the packets.
2. Select → Link Aggregaon → Aggregaon Group .
Note
Only gigabit ports can be added into aggregaon groups.
3. Click Add.
Figure 7-2 Add Aggregaon Group
Gigabit PoE Switch Client User Manual
12