HIKVISION DS-3WF0AC-2NT User Manual

DS-3WF0AC-2NT User Guide
11
Chapter 4 Network
4.1 Overview
Log in to the web UI, and choose Network.
You can change the network parameters of this wireless bridge here, including IP address, subnet
mask, gateway and DNS server addresses here.
Parameters Description
Items
Description
IP Address
It specifies the IP address (also named management IP address) of this device.
Devices in LAN can use it to log in to the web UI of this wireless bridge. If you want
to enable this wireless bridge to access the internet, this IP address should be set to
an unused IP address which is in the same segment as that of the egress router.
Subnet Mask
It specifies the subnet mask of the wireless bridge. The default is 255.255.255.0.
Gateway
It specifies the default gateway of this wireless bridge. It is optional.
If you want to enable this wireless bridge to access the internet, the gateway should
be set to the LAN IP address of the egress router.

HIKVISION DS-3WF0AC-2NT Specifications

General

Brand	HIKVISION
Model	DS-3WF0AC-2NT
Category	Network Hardware
Language	English