HIKVISION DS-3WF0AC-2NT User Manual

DS-3WF0AC-2NT User Guide
28
----End
6.3.2 Export
Log in to the web UI, choose System > Basic Service, and move to Export part.
The logs of the wireless bridge record various events that occur and the operations that users
perform after the wireless bridge starts. In case of a network fault, you can refer to the logs during
troubleshooting.
To ensure that the logs are recorded correctly, verify the system time of the wireless bridge. You
can correct the system time of the wireless bridge by choosing System > Time Settings.
When the wireless bridge reboots, the previous logs are lost.
The wireless bridge reboots when it is powered on again, the firmware is upgraded, a wireless
bridge configuration is imported or the partial reset or reset is performed.

HIKVISION DS-3WF0AC-2NT Specifications

General

Brand	HIKVISION
Model	DS-3WF0AC-2NT
Category	Network Hardware
Language	English