DS-3WF0AC-2NT User Guide
27
Configuration procedure
Step 1 Choose System > Basic Service, and move to the SSH Server part.
Step 2 Check the Enable box.
Step 3 Run the SSH client software on the management computer. PuTTY is used for illustration.
1) Run the Putty.
2) Set Connection type to SSH.
3) Set Host Name (or IP address) to 192.168.1.35.
4) Click Open.
Step 4 Enter the user name (hikvision) and login password of the wireless bridge according to the
instructions to log in to the configuration page.
To Next Page
Loading...
