HIKVISION DS-3WF0AC-2NT

To Next Page

To Previous Page

DS-3WF0AC-2NT User Guide

 If the new IP address is in the same network segment as that of the old one, refresh the page

and use the new IP address to log in to the web UI for configuration.

 If the new IP address is in different network segment from that of the old one, set the IP

address of your management computer to an unused one which should be in the same

network segment as that of the new IP address of the wireless bridge. Then use the new IP

address of the wireless bridge to log in to the web UI for configuration.

HIKVISION DS-3WF0AC-2NT - Page 18