HIKVISION DS-3WF0AC-2NT - Page 25

DS-3WF0AC-2NT User Guide
20
Configuration procedure
Step 1 Choose System > Maintenance.
Step 2 Click Reboot.
Step 3 Confirm the message on the pop-up window, and click OK.
----End
A progress bar is displayed on the page. Wait for it to elapse.
Partial reset
If you want to reset the wireless bridge to activated status, and keep network parameters and
login password unchanged, you can partial reset the device.
Configuration procedure
Step 1 Choose System > Maintenance.
Step 2 Click Partial Reset.
Step 3 Confirm the message on the pop-up window, and click OK.