HIKVISION DS-3WR12C - Page 125

WiFi Router • User Guide
117
LAN parameter description
LAN IP Address
It specifies the LAN IP address of the router, which is also the
management IP address for logging in to the web UI of the router.
Subnet Mask
It specifies the subnet mask of the LAN port, used to identify the IP
address range of the local area network.
DHCP Server
When the DHCP server is enabled, the router automatically assigns an
IP address to clients connected to the router
Start IP
It specifies the range of IP addresses that can be assigned to devices
connected to the router. The default range is 192.168.0.100 to
192.168.0.200.
End IP
Preferred DNS
Server
It specifies the primary DNS address of the router used to assign to
the clients. You can change it if necessary.
Make sure that the primary DNS server is the IP address of the correct
DNS server or DNS proxy. Otherwise, you may fail to access the internet.
Alternate DNS
Server
It specifies the secondary DNS address of the router used to assign to
the clients. It is an optional field and is left blank by default.
Parameter
Description