WiFi Router • User Guide
34
If you cannot access the internet, try the following solutions:
Ensure that the existing router is connected to the internet successfully.
Ensure that your wireless devices are connected to the WiFi network of the new router.
If the computer connected to the router for repeating cannot access the internet, ensure that
the computer is configured to obtain an IP address and DNS sever automatically.
When you have a smart home gateway that only provides wired internet access, you can set the
router to work in AP mode to provide wireless coverage.
When the router is set to AP mode:
Every physical port can be used as a LAN port.
The LAN IP address of the router will be changed. Please log in to the web UI of the router by
visiting http://hikvisionwifi.local.
Functions, such as bandwidth control and port mapping will be unavailable. Refer to the web
UI for available functions.
To Next Page
Loading...
