WiFi Router • User Guide
87
IPTV
If the IPTV service is included in the broadband service you purchased, you can enable the IPTV
function to enjoy both internet access and IPTV programs through the router at the same time.
To access the configuration page, log in to the web UI of the router, and navigate to Advanced >
IPTV.
This function is disabled by default. When it is enabled, the page is shown as below.
IPTV
IPTV parameter description
It is used to enable or disable the IPTV function of the router.
When this function is enabled, the port IPTV/3 can be used only as an IPTV
port to be connected to an IPTV set-top box.
It specifies the VLAN ID of your IPTV service.
If you do not have any information about VLAN provided by your ISP,
please keep Default.
If you are using the IPTV service in Shanghai, choose Shanghai VLAN and
choose the proper VLAN ID.
If you have a VLAN ID from your ISP, please choose Manual VLAN and
enter the VLAN value.