WiFi Router • User Guide
40
Wireless settings
Overview
On this page, you can configure basic WiFi parameters, such as the WiFi name and password.
To access the configuration page, log in to the web UI of the router, and navigate to Route
Settings > Wireless Settings > WiFi Name and Password.
WiFi name and password
WiFi name and password parameter description
It is used to turn on or off the Preferred Band function.
When it is enabled, the WiFi names of 2.4 GHz and 5 GHz networks
are integrated, and only one WiFi signal is shown. Devices
connected to the WiFi network will use the network with better
connection quality automatically.
It is used to enable or disable the WiFi networks of the router.
You can enable or disable the 2.4 GHz network and 5 GHz network
separately when the Unify 2.4 GHz & 5 GHz function is disabled.
If wireless devices such as mobile phones are far away from the
router or blocked from the router by a wall, it is recommended to
connect to the 2.4 GHz network.
If the wireless devices are close to the router, it is recommended
to connect to the 5 GHz network.
It specifies the WiFi network name (SSID) of the WiFi network.