HIKVISION DS-3WR12C - Only Allow Specified Device to Access the Internet

WiFi Router • User Guide
85
Scenario: The WiFi network in your home is misused by unknown users sometimes.
Goal: Only allow certain devices of family members to access the internet.
Solution: You can configure the MAC address filter function to reach the goal.
Assume the MAC address and connection status of your domestic devices are as follows.
MAC address connection status
Your own phone
6C:4B:90:41:E2:AD
Connected
Wife's phone
94:C6:91:29:C2:12
Disconnected
Daughter's phone
98:9C:57:19:D0:1B
Disconnected
Procedures:
Launch a web browser on a device connected to the router and visit
http://hikvisionwifi.local to log in to the web UI of the router.
Navigate to Advanced > MAC Address Filter.
Set the Filter Mode to Whitelist.
Enter the Whitelisted MAC Address of the device, which is 94:C6:91:29:C2:12 in this
example.
(Optional) Enter the remark for the device, which is Wife’s phone in this example.
Click .
Add white MAC address
Device
MAC address
Status